makebarcode.com
 

 


Barcode InfoPCL FontsHome

 

Symbol CS-1504 Scanner and Windows/XP
Home > Barcode Basics >
Application Notes > AppNote028

The Symbol CS-1504 "keychain scanner" is available with either USB or RS232 Serial ASCII interface. In order to use the USB version of the scanner on Windows, driver software must be installed. During installation, users of Windows/XP may receive an error message that reads something like this:

Cannot install this hardware
An error occurred during the installation of the device
A service installation section in this INF is invalid

The problem may be that (as of this writing) the USB driver distributed by Symbol Technologies is Version 1.09 which was not fully tested on Windows/XP. The Edgeport USB driver used by Symbol Technologies was developed by Inside Out Networks (www.ionetworks.com) and the latest version can be downloaded from their website. As of this writing Version is 2.70 is the latest for Windows 2000/XP. Here is a link to download that specific driver:

http://www.ionetworks.com/support/drivers/win2k/ip4n5270.exe

As time marches on, there will no doubt be updates and these will be named differently (notice the "270" at the end of the filename, indicating the version number). You may want to browse to the download directory and look for more recent versions:

http://www.ionetworks.com/support/drivers/win2k

Here is the procedure for removing your current driver and installing the new version::

  1. Unplug the CS-1504 scanner from the system
  2. Download the latest driver
  3. Double click on the file and extract the drivers to a location on your hard drive
  4. Navigate to that folder and double click on the ionetwrk.cab file and extract out the program called edgeport.exe
  5. Run the edgeport.exe program and go to the advanced tab. Click on uninstall and reboot the system when prompted.
  6. Once back up, plug the scanner back in and when prompted keep pointing XP to the location where you have extracted the 2.70 drivers.

This should do the trick. If you are using a multiport USB adapter under Windows/XP, there may be some other issues which can be corrected with a small registry update program available from Inside Out Networks tech support. The above information was provided by the helpful technical support staff at Inside Out Networks.

   

home
Contact:  info@makebarcode.com
(c) Copyright Measurement Equipment Corporation
All Rights Reserved